Abstract
The clinical report describes a three-dimensional (3D) printed coping for intraoral evaluation before milling final anterior restorations. The use of printed copings allows restorations for complex and esthetically important restorations to be thoroughly tested at relatively low cost without introducing large delays into the fabrication process.
Original language | English (US) |
---|---|
Pages (from-to) | 534-538 |
Number of pages | 5 |
Journal | Quintessence international (Berlin, Germany : 1985) |
Volume | 50 |
Issue number | 7 |
DOIs | |
State | Published - Jan 1 2019 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Dentistry(all)
Cite this
3D printed coping for intraoral evaluation : a clinical report. / Jurado, Carlos A.; Tsujimoto, Akimasa; Tanaka, Kenko; Watanabe, Hidehiko; Fischer, Nicholas G.; Barkmeier, Wayne W.; Takamizawa, Toshiki; Latta, Mark A.; Miyazaki, Masashi.
In: Quintessence international (Berlin, Germany : 1985), Vol. 50, No. 7, 01.01.2019, p. 534-538.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - 3D printed coping for intraoral evaluation
T2 - a clinical report
AU - Jurado, Carlos A.
AU - Tsujimoto, Akimasa
AU - Tanaka, Kenko
AU - Watanabe, Hidehiko
AU - Fischer, Nicholas G.
AU - Barkmeier, Wayne W.
AU - Takamizawa, Toshiki
AU - Latta, Mark A.
AU - Miyazaki, Masashi
PY - 2019/1/1
Y1 - 2019/1/1
N2 - The clinical report describes a three-dimensional (3D) printed coping for intraoral evaluation before milling final anterior restorations. The use of printed copings allows restorations for complex and esthetically important restorations to be thoroughly tested at relatively low cost without introducing large delays into the fabrication process.
AB - The clinical report describes a three-dimensional (3D) printed coping for intraoral evaluation before milling final anterior restorations. The use of printed copings allows restorations for complex and esthetically important restorations to be thoroughly tested at relatively low cost without introducing large delays into the fabrication process.
UR - http://www.scopus.com/inward/record.url?scp=85067809662&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85067809662&partnerID=8YFLogxK
U2 - 10.3290/j.qi.a42655
DO - 10.3290/j.qi.a42655
M3 - Article
C2 - 31187101
AN - SCOPUS:85067809662
VL - 50
SP - 534
EP - 538
JO - Quintessence International
JF - Quintessence International
SN - 0033-6572
IS - 7
ER -